Super Stone Concrete Sealer Tech-Data Bulletin

Concrete Sealer is a solvent base acrylic type sealer available in both clear and dispersed pigmented form. SuperStone Concrete Sealer has a combination of adhesive/surfactant that penetrates the concrete and masonry surfaces to displace moisture thus giving it highly superior bonding capabilities.

APPLICATION
Clean surface thoroughly by pressure cleaning if needed, otherwise wash it with a detergent & rinse thoroughly. If mildew is present, make sure it is removed. All dirt, oil, grease, and old print must be removed with the proper remover. Surface must be completely dry. May be applied with a brush, roller or airless sprayer. Always apply liberally to allow full penetrations. Do not leave puddles. The secret is to spread a thin even coat, let the first coat dry, and repeat the procedure. One gallon covers approximately 150 to 250 square feet depending on the porosity of the surface.

DRY TIME
Allow the coat of sealer to dry twenty-four hours for foot traffic and forty-eight hours for vehicular traffic. Do not park rubber tired vehicles on the surface for seventy-two hours. Clean tools with xylene or solvent.

ADVANTAGES
Super Stone Concrete Sealer has high resistance to water, alkali, and abrasion and ultra violet rays. Gives an acrylic finish that is protective, decorative & long lasting.

RECOMMENDED USES
Stamped concrete coating, unpainted concrete, concrete benches, brick, terra cotta tile, decorative stone surfaces, cool deck, keystone and Super Tex. Water resistant and sun resistant.

CHEMICAL STRENGTH AND PHYSICAL DATA
Opaque slightly viscous liquid Volume solids 27.00%
Weight solids 32.00%
Specific gravity 1.09
Pigment/vehicle 0.94/1.00
Gloss 65
Moisture vapor permeability ASTM E 97-66:0.001
Hardness (Toukon) 12-1000 cycles
Abrasion resistance 13.0 gram loss (Tabor)

SAFETY PRECAUTIONS
Contains toluene. Use with adequate ventilation. Avoid breathing vapor and prolonged or repeated contact with the skin. Do not use near fire or flame. Do not smoke during application and drying periods. Take precautions to keep from splashing in eyes. If material contacts skin, wash thoroughly with soap and water.

KEEP AWAY FROM CHILDREN.